SIKATACK - 10 600ml Grey

Panel Adhesive
Stock Code:
520857
$23.99 incl GST
Stock Level:
Secondary Warehouse

Description

DESCRIPTION

SIKATACK - 10 600ml Grey

1-component polyurethane for panel bonding in ventilated facades

SikaTack® Panel-10 is a non-sag, 1-component polyurethane of paste-like consistency for structural joints in ventilated facades and interior wall cladding between the vertically installed substructure and the panel that will be subjected to dynamic and static stresses. It cures on exposure to atmospheric humidity. SikaTack® Panel-10 is part of the SikaTack® Panel system for the economic, concealed fixing of ventilated facades.  

  • Elastic fixing system, vibration and movement absorbing
  • Provides creative opportunities for facade design
  • Uniform tension over the whole facade
    panel (no stress points)

PRODUCT BENEFITS

  • Elastic fixing system, vibration and movement absorbing
  • Provides creative opportunities for facade design
  • Uniform tension over the whole facade
    panel (no stress points)
  • 1-component product, ready to use
  • Weathering resistant
  • Bonds well to a wide variety of substrates

Usage

SikaTack® Panel-10 is suitable for structural joints in ventilated facades and cladded interior walls between the vertically installed substructure and the facade panel that will be subjected to dynamic and static stresses. Suitable substrates are anodized and coated aluminum, metal composite, high pressure laminate and ceramic materials. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.  

Packaging

Unipack600 ml

Product Details

 

Surface preparation

Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Surface treatment depends on the specific nature of the substrates and is crucial for a long lasting bond.

Application

The standard geometry for bonding façade panels is at least 12 x 3 mm. The supplied nozzle (10 x 8 mm) ensures proper dimension of the compressed bead.

The optimum temperature for substrate and adhesive is between 15 °C and 25 °C. Do not apply at temperatures below 5 °C or above  40 °C.

To avoid condensation on the surfaces, the temperature of the bonding components (e.g. façade panels, sub-frames) must be at least   3 °C higher than the dew point of the air.
The skin time is significantly shorter in hot and humid climate. The panel must always be installed within 75 % of the skin time determined under local climate conditions (see General Guideline “SikaTack® Panel System”). Never join bonding parts if the adhesive has formed a skin. SikaTack® Panel-10 can be processed with hand, pneumatic or electric driven piston guns.

h

Removal

Uncured SikaTack® Panel-10 can be removed from tools and equipment with Sika® Remover-208 or another suitable solvent. Once cured, the material can only be removed mechanically.

Hands and exposed skin have to be washed immediately using hand wipes such as Sika® Cleaner-350H or a suitable industrial hand cleaner and water.

Do not use solvents on skin.

Application limits

SikaTack® Panel-10 used for panel bonding is always used in conjunction with SikaTack® Panel Fixing Tape. SikaTack® Panel Fixing Tape ensures the correct joint thickness and keeps the bonded panels initially in place. By curing, SikaTack® Panel-10 builds up strength and takes over the long-term load bearing.
SikaTack® Panel Fixing Tape is not a structural component.

Product Details

Chemical base -          1-component polyurethane

 

Colour (CQP001-1) -       Grey

 

Cure mechanism -            Moisture-curing

 

Density (uncured) -          1.3 kg/l

 

Non-sag properties -       Good

 

Application temperature ambient - 5 ─ 40 °C

 

Skin time (CQP019-1)  - 60 minutes A

 

Curing speed (CQP049-1) - (See diagram)

 

Shore A hardness (CQP023-1 / ISO 48-4) – 40

 

Tensile strength (CQP036-1 / ISO 527)  - 1.8 MPa

 

Elongation at break (CQP036-1 / ISO 527)  - 500%

 

Tear propagation resistance (CQP045-1 / ISO 34)  -  7 N/mm

 

Service temperature (CQP509-1 / CQP513-1)  - -40 ─ 90 °C

 

Shelf life (CQP016-1)  -  12 months B

 

CQP = Corporate Quality Procedure  A) 23 °C / 50 % r. h  A) 23 °C / 50 % r. h

 

Still can't find what you're looking for? Our website is continuously being updated, so contact us by phone or email for anything else:

Phone:
03 5336 1111

Email:
online@iw.net.au

Details

  • Brand:
    Sikaflex