Kincrome Sale Flyer

 Teng Tools Monthly Sales

 Kincrome Apprentice Tool Kits

 

 

 

SIKASIL - Marine 300g Cartridge - Clear

Multipurpose Marine Sealant
Stock Code:
478302
$16.17 incl GST
Stock Level:
13 In Stock
Make an Enquiry
Add to Favourites

Description

DESCRIPTION

SIKASIL - Marine 300g Cartridge - Clear

Sikasil® Marine is a premium, neutral-curing
silicone sealant that displays excellent adhesion to a wide range of substrates and
provides a permanent, flexible bond or seal,
even under the most extreme marine conditions.

PRODUCT BENEFITS
- Excellent thermal, vibration, UV and weathering resistance
- Adheres well to fibreglass, metals, glass,
most plastics, varnished wood and painted
surfaces
- Sanitary grade (long-term mould resistance)
- Non-corrosive
- Fast-curing and highly effective
- Easy to apply

AREAS OF APPLICATION
Sikasil® Marine is a multipurpose product designed for use in both sea and fresh water
marine applications. It is suitable for sealing
windows, hatches, fittings and instruments,
as well as for bonding small components
which are not subject to high loads.
This product is suitable for professional experienced users only. Tests with actual substrates
and conditions have to be performed to ensure adhesion and material compatibility.

CURE MECHANISM
Sikasil® Marine cures by reaction with atmospheric moisture. The reaction starts at the
surface and proceeds to the core of the joint.
The curing speed depends on the relative humidity and the temperature. At low temperatures the water content of the air is lower and
the curing reaction proceeds more slowly.

METHOD OF APPLICATION
Surface preparation
Surfaces must be clean, dry and free from oil,
grease and dust.
Sika® Remover-208 or another suitable
solvent may be used for cleaning.
Application
To minimise smearing of surfaces with excess
sealant, masking tape can first be applied to
surrounding surfaces.
Cut the nozzle to the desired bead size then
apply a continuous bead as required. For
bonding, apply bead to only one surface. For
sealing, push the sealant into the joint as it is
being applied to ensure good wet out onto
the surface.
Assemble parts and/or tool off any excess
sealant before it skins over, then immediately
remove any masking tape.
For more information, please contact the
Technical Service Department of Sika Industry.
Removal
Uncured, excess Sikasil® Marine may be removed with Sika® Remover- 208 or another
suitable solvent. Cured sealant can only be
trimmed away or scraped off mechanically.
Hands and exposed skin should be washed
immediately using SikaCleaner®- 350H or a
suitable industrial hand cleaner and water.
Do not use solvents!

Overpainting
Sikasil® Marine cannot be overpainted. If a
similar but overpaintable product is required,
consider using Sikaflex®-291 marine adhesive
sealant.

Application limits
Sikasil® Marine is not recommended for use
on:
- below waterline applications (except as a
mechanically compressed gasket seal)
- sealing joints subject to heavy traffic (e.g.
deck caulking)
- pre-stressed polycarbonate or other plastic
surfaces that are prone to stress cracking
Joints deeper than 15 mm should be avoided.
The above information is offered for general
guidance only. Advice on specific applications
will be given on request

Still can't find what you're looking for? Our website is continuously being updated, so contact us by phone or email for anything else:

Phone:
03 5336 1111

Email:
online@iw.net.au

Details

  • Brand:
    Sikaflex