SKF LARGE INDUCTION HEATER UPTO 300KG CAPACITY

460v - User to fit plug top + Test & Tag
Stock Code:
TIH220M/MV
Price:
$13,374.33 incl GST

Description

High heating capacity of up to 300 kg bearing

The SKF large induction heater TIH 220m is a reliable and robust induction heater from the

SKF TIH...m range. It is suitable for heating bearings up to a maximum weight of 300 kg

(660 lbs) and solid components up to a maximum weight of 150 kg (330 lbs). 

Advanced design of the power electronics including current and overheating control,

combined with user friendly features such as sliding arms and remote control are

standard to the TIH...m range. 

Maximum efficiency is achieved by placing the induction coil outside the heater’s

housing, in the centre of the bearing,resulting in shorter heating time and lower

energy consumption. 

The LED operating display and control panel are integrated in a remote control,

which makes the heater easy to use. To suit different operating voltages worldwide,

the TIH 220m is available in different voltage variants.

 
  • Capable of heating a 220 kg (480 lbs) bearing in just 20 minutes, saving timeand energy
  • Supplied standard with two yokes, allowing bearings with a bore diameter from 60 mm (2.3 in) up to a maximum weight of 300 kg (660 lbs) to be heated
  • 2-step power setting and smaller yoke facilitates efficient heating of smaller bearings with a lower power consumption
  • Temperature mode pre-set at 110 °C (230 °F), helps prevent bearing overheating
  • Automatic demagnetisation
TECHNICAL DATA
Designation TIH 220M/LV
TIH 220M/MV
SKF m20 performance 220 kg (480 lbs)
Voltage, V/Hz

 TIH 220M/LV: 200-230V/50-60Hz
TIH 220M/MV: 400-460V/50-60Hz
Bearing:- Maximum weight300 kg (661.4 lb)
- Maximum bore diameter60 - 600 mm (2.3 - 23.6 in.)
Temperature control:- Range *0 - 250 °C (32 - 482 °F)
- Magnetic probeYes, K-type
- Accuracy (electronics)± 2 °C (± 3.6 °F)
Time control:- Range0 - 60 minutes
- Accuracy± 0,01 sec.
Performance example:- bearing, weight, temperature, time23172 CC/W33, 220 kg, 110 °C, 20m
Thermometer mode Yes
Bearing mode (pre-set at 110 °C/230 °F) Yes
Power reduction 2-step; 50 - 100%
Demagnetisation according to SKF norms (automatic) Yes (<2 A/cm)
Can heat sealed bearings Yes
Can heat pre - greased bearings Yes
Error guiding codes Yes
Thermal overload protection Yes
Maximum magnetic flux 1,55 T
Control panel Key board with LED in remote control
Operating area (w × h) 250 × 255 mm (9.8 × 10 in.)
Coil diameter 140 mm (5.5 in.)
Dimensions (w × d × h) 750 × 290 × 440 mm (29.5 × 11.4 × 17.3 in.)
Total weight, including yokes 86 kg (189 lbs)
Maximum power consumption 10,0-11,5 kVA (400-460V)
Number of standard yokes 2
Standard yokes 70 × 70 × 430 mm (2.8 × 2.8 × 16.9 in.), for heating bearings with bore diameter of 100 mm (3.9 in.) and larger
40 × 40 × 430 mm (1.5 × 1.5 × 16.9 in.), for heating bearings with bore diameter of 60 mm (1.6 in.) and larger
Core cross section 70 × 70 mm (2.8 × 2.8 in.)
Yoke storage Yes
Sliding arm Yes, 70 x 70 x 430 mm (2.8 x 2.8 x 16.9 in.) yoke only
Swivel arm No
Cooling fan No
Housing material Steel and glass fibre filled polyamide
* Maximum heating temperature capacity depends on the weight and geometry of the bearing or workpiece. The heaters can achieve higher temperatures, please contact SKF for advice.

Stock Level:
In Stock